Shell Omala S3 Wind 1x209l
Premium Wind Turbine Gear Oil
Shell Omala S3 Wind is a high‑performance mineral‑based gear oil developed for wind turbine main gearboxes. It offers reliable operation at low temperatures, excellent wear protection under high and shock loads, strong resistance to micropitting and high cleanliness standards to support long component life. Use in systems with fine filtration is not recommended due to potential impact on foam control performance.
Specifications, approvals and recommendations:
• ISO 12925‑1 CKD
• ANSI/AGMA 9005‑E02
• DIN 51517‑3 CLP
• IEC 61400‑4 CD IEC 2009
For the latest approvals and recommendations contact our technical helpdesk at [email protected] or visit Shell at www.epc.shell.com.
Shell Omala S3 Wind is a high‑performance mineral‑based gear oil developed for wind turbine main gearboxes. It offers reliable operation at low temperatures, excellent wear protection under high and shock loads, strong resistance to micropitting and high cleanliness standards to support long component life. Use in systems with fine filtration is not recommended due to potential impact on foam control performance.
Specifications, approvals and recommendations:
• ISO 12925‑1 CKD
• ANSI/AGMA 9005‑E02
• DIN 51517‑3 CLP
• IEC 61400‑4 CD IEC 2009
For the latest approvals and recommendations contact our technical helpdesk at [email protected] or visit Shell at www.epc.shell.com.
| Product No. | 2039302 |
| Supplier | SHELL |
| Applications |
Wind turbine main gearboxes. Systems requiring high‑cleanliness mineral gear oil. Yaw and pitch drive gearboxes using mineral lubricants. Not recommended for systems with fine filtration (<10 microns). Please consult Shell technical support for filtration‑sensitive applications. |
| Benefits |
|
Documents
Product Details
Product Range
Shell Omala
Group Name
Lubs Industry Lob
Sub Group Name
FL Industrial Gear Oils
Supplier Part Number
550056530
Prohibited Uses
Not suitable for systems requiring synthetic gear oils.
Not recommended for filtration systems below 10 microns.
Not intended for automotive hypoid gears.
Not recommended for filtration systems below 10 microns.
Not intended for automotive hypoid gears.
Approvals
ANSI/AGMA, IEC, ISO, DIN
Base Oil
Mineral
Get in touch, 24 hours a day, 7 days a week.
